Motorized Positioners

Compact Motorized Actuator 970-0060

• Reduced size • Manual drive with a knob • Limit switch: optoelectronic couple • Step motor controllers (USB, RS232, Manual) are offered separately • Optional power supplies fo...

From $530

Motorized Actuator 970-0050

• Compact • Manual drive with a knob • Two limit switches • Step motor controlers (USB, RS232) are available separately • Optional power supplies for higher voltages/speeds are ...

From $577

Motorized Actuator 970-0065

• Compact • Manual drive with a knob • Two limit switches • Step motor controllers (USB, RS232, Manual) are offered separately • Optional power supplies for higher voltages/spee...

From $532

Motorized Delay Line 960-0100

• 300 mm travel range • Steel rail design. Stability and rigidity ensured • 2.5 µm nominal resolution • Recirculating ball modules are incorporated in the platform • Stepper mot...

From $3,471

Motorized Fiber Coupling Stage 970-0070

• Fiber coupling stage of flexure design • Rotating platform on the top • Compact block design • Motorized actuator 970-0065 • Smooth motion Long-term stability Flexure stages ...

From $2,309

Motorized Flipper Mount 940-0090

• Controlled with button, handset, external trigger or 980-0045-USB controller (not included) • Mechanical hard stops ensure repeatable positioning • M6x7 threaded hole for post...

From $18

Motorized Gimbal Mount 940-0096

• Angular range ±2,5° • Resolution 0,156 μm • Two Compact Motorized Actuators 970-0060 are installed • Optics diameter is 25,4 mm • Clear aperture - 23 mm • Vacuum version 940-0...

From $981

Motorized Goniometers 960-0180

• Rotates an object without obscuring the optical path • Superb stability • 1 or 2 axes of rotation (stackable) • Smooth operation with ball bearings • Compact square body Moto...

From $1,156

Motorized Mirror / Beamsplitter Mount 940-0060

• Mounts for Ø 1", Ø 2", Ø 3" optics • Tilt travel range 9° (about two axes) • Mounting on either of 2 sides • Clear edge design • Vacuum version available under request 940-00...

From $1,192

Motorized Precision Vertical Positioner 940-0218

Motorized Vertical Positioning Stage 940-0218 provides high-precision positioning and smooth travel for loads up to 10 kg. Together with high quality linear bearing guide the sy...

Motorized Screws 970-0040

• Manual drive with a dial knob • Resolution 0.156 µm in 1/8 step mode • Scale on the dial knob allows reading accuracy to a step • Two limit switches • Optional power supplies ...

From $405

Motorized Vertical Lift Stage 940-0220

• Compact • Stiff and stable • Two optical limit switches • Clean room grease Motorized Vertical Lift Stage 940-0220 offers precise vertical translation for elevating object...

From $1,839

Motorized Vertical Positioning Stage 940-0215

Motorized Vertical Positioning Stage 940-0215 provides high-precision positioning and smooth travel for loads up to 10 kg. Together with high quality linear bearing guide the sy...

Motorized Z Stage 940-0212

Compact Motorized Z Stage provides 13 mm travel range. The stages ideally fits many motorized linear stages. 960-0170 series motorized rotation stages can be directly mounted on...

From $1,306

Power Supplies

Current requirements for stepper motor controller power supplies: During operation current consumption will vary depending upon how the controller is being used. Before shipme...

From $56

Stepper & DC Motor Controller 980-0045-USB

• One interface for stepper and DC motors • Up to 35000 steps/s even in microstep mode, 20000 rpm for DC motor • High resolution - 256 microsteps • Smooth movement at low speeds...

From $576

Ultra-High Resolution Compact Motorized Actuator (DC Motor) 970-0067

• 13 mm or 25 mm travel range. • Resolution is 0.1 μm • Ultra-High Resolution Compact Motorized Actuator with Vacuum compatible DC motor 970-0067V is available.

From $681

Ultra-High Resolution Compact Motorized Actuator with Vacuum Compatible DC motor 970-0067V

• 13 mm or 25 mm travel range • Lead screw pitch is 0.25 mm • Max. speed is 0.15 mm/s • Cable: integrated, 2 m length • Non-vacuum version Motorized actuators mostly u...

Vacuum Compatible Motorized Stages 960-0060V

• Narrow • Compact design • Resolution 0.31 µm (1/8 step) • High guide way accuracy • Lead screw pitch 0.5 mm • X-Y-Z configurations available • Non vacuum version Vacuum Compa...

Vacuum Compatible Motorized Vertical Drive Optical Mount with DC motor 940-0080

• 1'' or 2" optics diameter • Stainless steel • Annealed front panel • Compact/robust design • Super stable • Manual version Vacuum Compatible Motorized Vertical Drive Mirror M...

Motorized Mirror Mounts 940-0050

Motorized Mirror Mounts 940-0050 are designed for precise angular alignment of optical elements. The platform is tilted about two axes, while a retaining ring keeps optics in a ...

From $666