EKSMA Optics Achieves Joint 2nd–3rd Place in the HiLASE LIDT Challenge 2026

22 October 2026

EKSMA Optics achieved a joint 2nd–3rd place in the HiLASE LIDT Challenge 2026, demonstrating the laser damage resistance of its high-reflectivity mirror under demanding test conditions.

The mirror reached a laser-induced damage threshold (LIDT) of 15 J/cm² at 1030 nm and 10 ns, exceeding the challenge requirement of 10 J/cm² by 50%.

Tested Under Demanding Conditions

The mirror was tested in a vacuum of approximately 10⁻³ mbar using a large laser spot of approximately 5 × 5 mm on the specimen. These conditions provided a demanding assessment of the coating's resistance to laser-induced damage.

A Result Reflecting Routine Production

What makes this result particularly significant is that the tested mirror was not an experimental design, nor was its coating specially optimised for the challenge. It came from an established coating run used in EKSMA Optics' routine production, employing the same coating design and deposition process as those used for standard products.

This result demonstrates the laser damage resistance achievable with EKSMA Optics' established production processes, providing valuable evidence of coating performance under demanding laser conditions.

EKSMA Optics thanks the HiLASE team for organising the LIDT Challenge 2026 and providing an opportunity to evaluate optical coatings under demanding test conditions.

← Back to news