← Back to product family
Potassium Titanyl Phosphate – KTP Crystals SKU: KTP-1030-02
KTP (Potassium titanyl phosphate) is a nonlinear crystal mostly used in extracavity configuration when a single pass through the crystal is required. KTP crystals are optimized for SHG intracavity configuration in low peak power CW lasers. Due to the large number of passes…
Variant specifications
| Product | Value |
|---|---|
| Width | 4.5 mm |
| Width Upper Tolerance | 0.1 mm |
| Width Lower Tolerance | -0.1 mm |
| Height | 4.5 mm |
| Height Upper Tolerance | 0.1 mm |
| Height Lower Tolerance | -0.1 mm |
| Thickness | 9 mm |
| Applications | SHG |
| Pump Wavelength | 1064 nm |
| Material | KTP |
| Product Type | T2 |
| Theta Angle | 90 Deg |
| Theta Angle Tolerance | 0.5 Deg |
| Phi Angle | 23.5 Deg |
| Phi Angle Tolerance | 0.5 Deg |
| TWD, fringes @633 nm | 0(0.3) |
| Parallelism, angle | 0 - 20 sec |
| Surface 1 | Value |
|---|---|
| Surface quality, MIL | 10-5 |
| Clear Aperture, % | > 90 % |
| Surface 1, Wavelength 1 | Value |
|---|---|
| Coating | AR |
| Wavelength | 532 nm |
| AOI (angle of incidence) | 0 deg |
| Surface 1, Wavelength 2 | Value |
|---|---|
| Coating | AR |
| Wavelength | 1064 nm |
| AOI (angle of incidence) | 0 deg |
| Surface 2 | Value |
|---|---|
| Surface quality, MIL | 10-5 |
| Clear Aperture, % | > 90 % |
| Surface 2, Wavelength 1 | Value |
|---|---|
| Coating | AR |
| Wavelength | 532 nm |
| AOI (angle of incidence) | 0 deg |
| Surface 2, Wavelength 2 | Value |
|---|---|
| Coating | AR |
| Wavelength | 1064 nm |
| AOI (angle of incidence) | 0 deg |
| Side Surface 1 | Value |
|---|---|
| Perpendicularity | 0 - 5 min |
Product brochures
Shared documentation for the complete product family.