← Back to product family
DPD Cavity Dumping & Pulse Picking Pockels Cell Drivers SKU: DPD-500-2.6-Al
Features: • Fast HV rise/fall time <6-9.5 ns • HV pulse amplitude up to 7 kV • Pulse repetition rate up to 1 MHz • Output pulse jitter <50 ps if trigger pulse rise time <0.5 ns DPD series drivers are designed for wide range of applications and operating modes. Repetition rate…
Variant specifications
| Specification | Value |
|---|---|
| Max. HV operating voltage | 2.6 kV |
| Max. HV repetition rate | 500 kHz |
| Control | 2 sync pulse |
Shared product specifications
These specifications apply across the DPD Cavity Dumping & Pulse Picking Pockels Cell Drivers product family.
General Specifications for DPS/DPD Series Drivers
| Driver model | DPS/DPD | DPBX |
|---|---|---|
| Maximal HV operating voltage | up to 5.2 kV | up to 7.0 kV |
| HV pulse rise time | <6 - 8.5 ns | <6 - 9.5 ns |
| HV pulse fall time | <6 - 8.5 ns | <6 - 9.5 ns |
| HV pulse duration | 100 - 5000 ns | 100 - 5000 ns |
| HV pulse duration extension using pulse regeneration technique | Yes | Yes |
| Maximal HV pulse repetition rate | up to 1000 kHz | up to 1000 kHz |
| External triggering pulse duration requirement | >100 ns | >100 ns |
| External triggering pulse amplitude requirement | 3-5 V (50 Ω load) | 3-5 V (50 Ω load) |
| External triggering pulse rise & fall time | <20 ns | <20 ns |
| Maximal length of leads to Pockels cells | 10 cm (<5 cm recommended) | 10 cm (<5 cm recommended) |
| Control by triggering (sync) pulses | 1 or 2, fixed | 1 or 2, switchable |
| HV pulse delay | 45 ns | 45 ns |
| External powering requirements: -high voltage supply -low voltage DC supply | - depends on modification -12±0,5V, <150 mA; 14-25 V; <150 mA, on request |
Product brochures
Shared documentation for the complete product family.