Table Supports 765, 766
- convenient sizes
- optimal height
- multipurpose in use
- handy assembling
Optical Table Supports are primarily designed for support of the Honeycomb Tabletops 720-740. Table Supports are produced from steel tubes of 100 mm square section, in decorative black coating, and contain two "Π" type supports, bound by a cross-beam.
Optical Table Supports ideally suit other types of optical plates and other equipment, e.g. Laser Shelves, as well. This is possible because plates are not fastened – they are just laid on top of the supports.On request we produce table supports of any size, design, and of greater sturdiness.
Table Supports:
ORDERING INFORMATION for Leveling Elements
Type of upper leveling elements of optical table support can be chosen from AS, AR or AP (see descriptions below). Bottom elements on optical table support are of type AS.
Default choice for upper elements of 765/766 is AR rubber leveling elements.
Example:
765-0507 – table support sized 500 x 500 × 700 mm (Height (h) x Width (b) × Length (l)) with 4 pieces of AR leveling elements on top and 4 pieces of AS leveling element at the bottom.
For other types of leveling elements please append element abbreviation to product code.
Examples:
766-0512-AS – size 600 x 500 × 1200 mm (Height (h) x Width (b) × Length (l)), type of leveling elements – AS (8 pieces, 4 on top and 4 at the bottom).
766-6518-AP-200 – size 600 x 650 × 1800 mm (Height (h) x Width (b) × Length (l) ), with 4 pieces of leveling elements type AP-200 on top and 4 pieces of leveling elements type AS at the bottom.
Passive air leveling vibration isolator (AP) are pneumatic elastomeric mounts, ideal for applications requiring higher deflection isolators. The SLM’s mechanical bond design incorporates a positive locking system to ensure performance and safe operation.
AP isolator has an operating temperature range of -20 °F to +180 °F (-30 °C to +180 °C) and is resistant to oils, most solvents and ozone.
| Code | h, mm | b, mm | l, mm | H*, mm | Weight | Best for tabletops | Item price, USD | In stock | Add to cart |
Type of upper leveling elements of optical table support can be chosen from AS, AR or AP (see descriptions below). Bottom elements on optical table support are of type AS.
Default choice for upper elements of 765/766 is AR rubber leveling elements.
Example:
765-0507 – table support sized 500 x 500 × 700 mm (Height (h) x Width (b) × Length (l)) with 4 pieces of AR leveling elements on top and 4 pieces of AS leveling element at the bottom.
For other types of leveling elements please append element abbreviation to product code.
Examples:
766-0512-AS – size 600 x 500 × 1200 mm (Height (h) x Width (b) × Length (l)), type of leveling elements – AS (8 pieces, 4 on top and 4 at the bottom).
766-6518-AP-200 – size 600 x 650 × 1800 mm (Height (h) x Width (b) × Length (l) ), with 4 pieces of leveling elements type AP-200 on top and 4 pieces of leveling elements type AS at the bottom.
| AR Rubber Leveling Element |
 Rubber leveling element (AR) ensures sufficient vibration isolation. |
| AS Solid Leveling Element |
 Solid Leveling element (AS) is used, when no dumping is needed. |
| AP Passive Air Leveling Vibration Isolator |
 Passive air leveling vibration isolator (AP). There are different models of AP with different load capacities., Natural Frequency 3-5 Hz. |
Passive air leveling vibration isolator (AP) are pneumatic elastomeric mounts, ideal for applications requiring higher deflection isolators. The SLM’s mechanical bond design incorporates a positive locking system to ensure performance and safe operation.
AP isolator has an operating temperature range of -20 °F to +180 °F (-30 °C to +180 °C) and is resistant to oils, most solvents and ozone.
| Model | M | B, mm | Load range, kg for 4 pieces | max Pressure, bar |
| AP-200 | M10 |
76.5 |
44-180 | 5 |
| AP-500 | M12 |
106.5 | 136-544 | 5 |
| AP-1000 | M12 | 130 | 272-1088 | 8 |
Back