Pneumatic Vibration Isolation Systems 750
Pneumatic Vibration Isolation Systems ensure low resonant frequency almost independent of load. They have automatic leveling valves and an autonomous air supply reservoir.
The pressure in isolators vary with the load. An air reservoir provides replenishment. When required, it may be refilled with a car pump. Keep the pressure between 1-2 kg/cm².
Vibration Isolation Systems 750 and 752 have all legs connected (air reservoir concealed in the connecting beam).
Adjustment knobs (on 3 legs of 750 and 752) adjust the level of the working surface within 12 mm. Each leg maintains its level with accuracy of ±1 mm.
We offer the optimal Vibration Isolation Systems for the optical table of your choice. Required dimensions can be calculated from the following formulas:
B = 0.56 x b; L = 0.56 x l; H = 900 - h
Standard dimensions of 750 are presented below. Select the closest greater values matching your calculations.
| B |
500 mm 650 mm 800 mm |
code 05 code 065 code 08 |
| L |
800 mm 1300 mm 1900 mm |
code 08 code 13 code 19 |
| H | 550 mm 600 mm 650 mm 700 mm 750 mm |
code 55 code 60 code 65 code 70 code 75 |
Back