You are here: Home » Products » Pockels Cells and Drivers » PCD-PHR High Repetition Rate Pockels Cell Driver
PCD-PHR High Repetition Rate Pockels Cell Driver
Features:- Pulse repetition rate up to 100 kHz
- Fast HV rise time <7 ns for 2.4 kV pulse.
- HV pulse amplitude up to 4 kV
PCD-P has been designed for use in mode-locked lasers for cavity dumping or for cavity Q-switching of solid-state nanosecond lasers. Fast HV (less than 7 ns) edge ensures excellent pre- and post-pulse contrast.
Ability to operate at high pulse repetition rates makes this driver perfect fit for most of diode-pumped nanosecond lasers. For pulse repetition rates up to 10 kHz heatsink is not required. For high repetition rates the driver should be attached to the heatsink with thermal resistance of at least 0.4 °C/W for room temperature (25 °C) operation. The driver is mounted into dielectric box providing electrical insulation. Low voltage power supply is required to internal triggering circuit, while tuning of HV power supply voltage.
Ability to operate at high pulse repetition rates makes this driver perfect fit for most of diode-pumped nanosecond lasers. For pulse repetition rates up to 10 kHz heatsink is not required. For high repetition rates the driver should be attached to the heatsink with thermal resistance of at least 0.4 °C/W for room temperature (25 °C) operation. The driver is mounted into dielectric box providing electrical insulation. Low voltage power supply is required to internal triggering circuit, while tuning of HV power supply voltage.
| Maximum high voltage (HV) pulse amplitude | 4.0 kV |
| Polarity | Positive |
| HV pulse rise time |
< 7 ns |
| HV pulse fall time |
~2 µs 1) |
| HV pulse duration |
120 ns 1) |
| Maximum HV repetition rate |
100 kHz |
| HV pulse jitter |
< 0.5 ns |
| External triggering pulse duration | 100...1000 ns |
| External triggering pulse amplitude | 3-5 V (50 W) |
| External triggering pulse rise time | < 10 ns |
| HV pulse delay | 35–40 ns |
| External powering requirements: high voltage supply low voltage DC supply |
0–4.0 kV, 7 mA max 2) 9–24 V, 500 mA max 2) |
| Operating temperature | 0–35 °C 3) |
| Size | 104 × 52 × 25 mm |
2) Test conditions: PRR=100 kHz, C=2 pF, U=4 kV;
3) Heatsink temperature should be bellow 35° C at 100 kHz pulse repetition rate.
| Code | Item price, USD | In stock | Add to cart |
Back